LG BLGRESU10HP Installation Manual page 8

Standing bracket 1
Battery Module B
Label
Wall
Battery Module Direction
Battery Module A
Label
Wall
Battery Module B
Rear
Front
Battery Module A
TOP VIEW
Module Support BRKT
3.
Standing bracket 1 on the wall.
4. Place Battery Module B on the rear
side of Module Connect plate.
* The side without bolts is the front
of the Battery Module.
*
battery pack is of B. Label is
attached on the left side of Battery
Module.
5. Place Battery Module A on the front
side of Module Connect plate. The
Rear side of each Battery Module
should face each other. After that,
remove the Spacer between the wall
and Battery Module.
*
Battery pack is of A. Label is
attached on the left side of Battery
Module.
6. Assemble Module Support BRKTs
using 6 bolts each.
* Tighten the M6 Flange Bolts (x12)
with a torque of 5N·m.
7. Remove bubble wrap from
Battery Control Unit
connectors of Battery Control Unit
and the warning label of Battery
Modules.
Battery Modules
8. Place the spacers on the position
Spacer
marked with label on Battery
Modules.
Spacer
TOP VIEW
9. Place the Battery Control Unit on
Battery Control Unit
top of the spacers, and align with the
Battery Module.
* Be careful not to break the
connector between the spacers and
the Battery Control Unit.
8