Touch Screen Test; F.17.10Food Safety; F.17.11Autostart; F.17.12Manual - Electrolux SkyLine PremiumS User Manual

1. Touch different points on the screen to check calibration
accuracy;
2. Touch and hold to exit;
1
Calibration completed. Touch
different points on the screen to
check accuracy. Press and hold
to exit. After 30 seconds the
calibration will be aborted.
X
0
F.17.9

TOUCH SCREEN TEST

Touch screen test
1. Touch the screen as close as possible to the centre of the
red cross;
2. Repeat until the cross turns green;
3. Touch to exit;
Touch to test. Hold down to exit.
F.17.10 FOOD SAFETY
Food safety
This setting allows to enable / disable (
parameters:
SETTINGS
Food safety
Enable Food Safety Control (FSC)
Show F value during cooking
Ask for FSC set on start
Enable HACCP
Food Safe Control (FSC)
The FSC feature guarantee the microbiological safe condition of
the food. If the FSC function is enabled it will be possible to:
• Enable/disable the visualisation of the "F" factor;
• Enable/disable asking for FSC set on start.
58
2
21
4
3
Y CNT
0 0
/ ) the following
HACCP
• The HACCP feature allows the storage of all the set values
identifying a cooking process, and their variation, the cavity
temperature and, when used, the food core temperature at
specific intervals.
F.17.11 AUTOSTART
Autostart
This setting allows to enable / disable (
feature in all modes.
SETTINGS
Autostart
Start cycle by closing the door
The Autostart function allows the start of the selected program by
closing the oven door.
F.17.12 MANUAL
Manual
This setting allows to enable / disable (
cooking mode and its options:
SETTINGS
Manual
Enable Manual Cooking cycle
General
Timer/Temperature dialogs
Utilities
Hold
NOTE!
If a mode is disabled, it is not visible in the upper
drawer.
General
• Show real and set values. The activation allows to display the
cycle with more detailed information: humidity, temperature
and time are shown as current and set values.
• Always show food probe temperature. It allows to display the
probe temperature values.
• Cooking preheating. It allows the oven to perform the
preheating/precooling phase.
• Advanced preheating. This activation allows to set a temper-
ature to be reached in preheating/precooling phase. Touch
the temperature row and set the required value.
• Delayed start preheating. This activation allows the oven
preparing the cavity for the delayed cooking cycle.
• Multi-phase cooking. It allows the oven to perform Multi-phase
cooking cycle.
/ ) the Autostart
/ ) the Manual