G.14 Other Surfaces; G.15 Periods Of Non-Use; G.16 Boiler Maintenance; G.17 Replacing Wear And Tear Components - Electrolux SkyLine PremiumS User Manual

G.14 Other surfaces

• Clean external glass, metal and plastic parts only with non-
aggressive detergents. Stop immediately using those prod-
ucts if detecting any visual or tactile characteristic change on
surfaces and thoroughly rinse with water (examples: glass
becoming mat/scratched/other, or plastic discoloring/melting/
other, or metal showing rust/stains/scratches). Carefully dry
after rinsing.
IMPORTANT
As for the plastic handle, do not use detergents
containing sodium hypochlorite.
• Clean the stainless steel parts every day using lukewarm
neutral soapy water;
Rinse with plenty of water and dry thoroughly.
• Do not clean the stainless steel with steel wool, brushes or
scrapers in common steel, as they could deposit ferrous
particles which oxidize, causing rust spots;

G.15 Periods of non-use

If the appliance is not going to be used for some time, take the
following precautions:
• close the water supply tap(s), if present;

G.19 Maintenance intervals

It is advisable to carry out the checks with the frequency given in the following table:
Maintenance, inspections, checks and cleaning
Ordinary cleaning
• general cleaning of appliance and surrounding
area
Mechanical protection devices
• check their condition and for any deformation,
loosening or removed parts
Control
• check the mechanical parts, for cracks or defor-
mations, tightening of screws: check the
readability and condition of words, stickers and
symbols and restore if necessary
Appliance structure
• tightening of main bolts (screws, fixing systems,
etc.) of appliance
Safety signs
• check the readability and condition of safety
signs
• close the gas valves;
• disconnect the power supply or remove the plug from the
power socket, if present;
• clean the cabinet, going over all the stainless steel surfaces
vigorously with a rag moistened with paraffin oil to create a
protective film;
• periodically air the premises.
IMPORTANT
The warranty does not cover any damages caused by
ice formations in the appliance pipes.

G.16 Boiler maintenance

In case of excessive scale in the boiler the display signals the
need to carry out descaling.
• For boiler descaling see F.16.2 BOILER DESCALING
paragraph.
IMPORTANT
The manufacturer declines any liability if these
prescriptions are not respected;
Also, the warranty does not cover the repair or
replacement of components damaged by scale when-
ever the required supply water characteristics are not
respected.

G.17 Replacing wear and tear components

There are parts, whose damage happens because of the
ordinary use during a period, which are not covered by the
manufacturer warranty.

G.18 Repair and extraordinary maintenance

NOTE!
Repair and extraordinary maintenance have to be
carried out by specialised authorised personnel, who
can ask the manufacturer to supply a servicing
manual.
Frequency
• Daily
• Every 6 months
• Yearly
• Yearly
• Yearly
Responsability
• Operator
• Service
• Service
• Service
• Service
67