Residual Risks - Electrolux SkyLine PremiumS User Manual

• tampering with the guards or safety devices;
• failure to use personal protection equipment by operators, specialised personnel and
maintenance personnel;
• failure to use suitable accessories (e.g. use of unsuitable equipment or ladders);
• keeping combustible or flammable materials, or in any case materials not compatible with
or pertinent to the work, near the appliance;
• wrong appliance installation;
• placing in the appliance any objects or things not compatible with its use, or that can
damage the appliance, cause injury or pollute the environment;
• climbing on the appliance;
• non-compliance with the requirements for correct appliance use;
• other actions that give rise to risks not eliminable by the Manufacturer.
A.7

Residual risks

The appliance has several risks that were not completely eliminated from a design standpoint
or with the installation of adequate protection devices. Nevertheless, through this manual the
Manufacturer has taken steps to inform operators of such risks, carefully indicating the
personal protection equipment to be used by them. In order to reduce the risks, provide for
sufficient spaces while installing the unit.
To preserve these conditions, the areas around the appliance must always be:
• kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.);
• clean and dry;
• well lit.
For the Customer's complete information, the residual risks remaining on the appliance are
indicated below: such actions are deemed improper and therefore strictly forbidden.
Residual risk
Slipping or falling
Burns/abrasions (e.g. heating
elements, cold pan, cooling circuit
plates and pipes)
Electrocution
Falling from above
Crushing or injury
Tipping of loads
Description of hazardous situation
The operator can slip due to water, any liquid or dirt on
the floor
The operator deliberately or unintentionally touches
some components inside the appliance without using
protective gloves.
Contact with live parts during maintenance operations
carried out with the electrical panel powered
The operator intervenes on the appliance using
unsuitable systems to access the upper part (e.g. rung
ladders, or climbs on it)
The specialised personnel may not correctly fix the
control panel when accessing the technical
compartment. The panel could close suddenly.
When handling the appliance or the packing
containing it, using unsuitable lifting systems or
accessories or with the unbalanced load
9