Table of Contents
Advertisement
CO NF IG UR AT IO N O F WIR ELES SHART NET WORK
Mode
Standard Profile
25-node Fast Update
Legacy Mode
P1
P2
WirelessHART
Gateway Profile
Default
25-Node Fast Update
Legacy Mode
P1
P2
2. Click Submit button to save the changes.
The AWIN GW100 rev.2 must be rebooted for the changes to take effect.
6.6
Configuration of WirelessHART Network
Click on Configuration > WirelessHART > Network Configuration in the left navigation col-
umn to configure the WirelessHART network.
3 4
Table 8: Gateway Profiles
Description
It creates a standard WirelessHART frame size.
It allocates additional time slots for faster updates. It is rec-
ommended for time sensitive applications.
It is optimized for networks consisting of loop powered Wire-
lessHART adapters to reduce power consumption.
This profile allows about 4.5 pkt/s to be injected by the gate-
way into the network. It is the factory default profile.
Note: This profile option is available in firmware version 1.5-1.
This profile has one-eighth of the downstream capacity. Us-
ing P2 can save all devices battery power but takes longer to
build the network and greatly reduces downstream applica-
tion bandwidth.
Note: This profile option is available in firmware version 1.5-1.
Table 9: WirelessHART gateway profile settings
Frame Size for Up-
stream Traffic
Standard
128
1024
1024
1024
Frame Size for Down-
stream Traffic
Standard
128
256
256
2048
CO NF IG URATI ON
Frame Size for Adver-
tising Traffic
Standard
128
128
128
128
3B NP 10299 2 B
Advertisement
Table of Contents
Troubleshooting
