Troubleshooting; Led Indicators; Figure 32: Awin Gw100 Rev.2 Led Locations; Table 14: Color Code - ABB GW100 User Manual

LED I N DI CATOR S
8

Troubleshooting

8.1

LED Indicators

Figure 32 shows the LEDs location on the front of the gateway itself. Unmarked LEDs are ex-
plicitly pointed in the figure.
LED name
ST (multi color)
MESH (green color)
ERR (red)
RED
PRI
P1, P2 (green color)
S1, S2 (green color)
5 2

Figure 32: AWIN GW100 rev.2 LED locations

Table 14: Color code

Description
STATUS
Flashing (green) - device initializing
Flashing (red) - device rebooting or error recovery
ON (green) - power/device active
DEVICE(S) CONNECTIVITY
ON - WirelessHART device(s) connected
OFF - No WirelessHART devices found/connected
ERROR
OFF - no errors
ON - internal error
OFF - not in use
OFF - not in use
1000Mbps LAN NETWORK (Top LED)
ON – 1000Mbps LAN connected
OFF – 1000Mbps LAN not connected 10/100Mbps LAN
NETWORK (Bottom LED)
ON – 10/100Mbps LAN connected
OFF – 10/100Mbps LAN not connected
Flashing (green) - Transmission/Reception ongoing
OFF - not in use
TR OUB LE SHO OTI NG
3B NP 10299 2 B