Table of Contents
Advertisement
3.5.2.5
Network and Power Supply Socket
The Network and power supply sockets (Figure 19, A) combine power and data distribution for
each column of modules in the LED Wall. The sockets are male and female adapters at the top and
bottom surfaces of the cabinet. The sockets interconnect two cabinets of a column (Figure 20).
The socket is connected to Ethernet ports (Figure 19, B) on the Hub board (D) and to the Power
distribution unit (PDU) (wiring, C).
The sockets wire to the PDU (Figure 21, E) and ground (F) on the cabinet. The PDU, in turn,
connects to the redundant Power supply units (G) via the hub board's power supply connectors
(see also Figure 27, D, p. 31).
The Ethernet cables plug into Ethernet ports on the Hub board (Figure 19, B).
A
B
C
D
Figure 19: Network and Power Supply Sockets – Top and Bottom
E
G
F
Figure 20: Connected Sockets
Figure 21: Sockets Wired to PDU behind HUB
28
Advertisement
Table of Contents
