Pioneer MJ-L7 Service Manual page 40

MJ-L7
Step No. Setting Method Remarks Display
Step 17 Press the MENU button H comparison level setting during CONT generation (During playback) [ COTLVHp ¢ 4]
Step 18 Press the MENU button L comparison level setting during CONT generation (During playback) [ COTLVLp ¢ 4]
Step 19 Press the MENU button H comparison level setting during CONT generation (During recording) [ COTLVHr ¢ 4]
Step 20 Press the MENU button L comparison level setting during CONT generation (During recording) [ COTLVLr ¢ 4]
Step 21 Press the MENU button Waiting time setting during automatic moving [ WAITm ¢¢]
@ ¢¢: Setting
@ When the CANCEL button of DISPLAY unit is pressed at a step, the unit will shift to the opposite step.
e@ When the + button of DISPLAY unit is pressed when the setting is displayed, the setting will increase and the new setting will be stored
in the RAM.
When the — button of DISPLAY unit is pressed when the setting is displayed, the setting will decrease and the new setting will be stored
in the RAM.
When the STOP button of the Unit is pressed when the EEPROM setting menu is displayed, the test mode STOP state will be set.
When the STOP button of the Unit is pressed in the tracking setting menu state, the EEPROM setting menu state will be set.
When the STOP button of the Unit is pressed at each setting item display state, the tracking setting menu state will be set.
When the PLAY/PAUSE button is pressed at each setting display state, only the tracking servo is turned ON/OFF forcibly.
(4) Slide Setting
Step No. Setting Method Remarks Display
Step 1 Test mode STOP state [tsmmmA ACH & |
Step 2 Press the MENU button four times | Reads each setting from the EEPROM. [ EEPROM SET ]
EEPROM menu display mode
Step 3 Press the PLAY/PAUSE button Focus setting menu [ Focus ]
Step 9 Press the MENU button Slide kick pulse level setting (Auxiliary for ten jumps) [ SLKLVt ¢ ¢]
Step 10 Press the MENU button Slide kick pulse level setting (When moving) [ SLKLVm ¢¢]
@ ¢¢: Setting
@ When the CANCEL button of DISPLAY unit is pressed at a step, the unit will shift to the opposite step.
@ When the + button of DISPLAY unit is pressed when the setting is displayed, the setting will increase and the new setting will be stored
in the RAM.
e@ When the — button of DISPLAY unit is pressed when the setting is displayed, the setting will decrease and the new setting will be stored
in the RAM.
When the STOP button of the Unit is pressed when the EEPROM setting menu is displayed, the test mode STOP state will be set.
When the STOP button of the Unit is pressed in the slide setting menu state, the EEPROM setting menu state will be set.
When the STOP button of the Unit is pressed at each setting item display state, the slide setting menu state will be set.
(5) Temp Setting
Setting Method Remarks Display
Test mode STOP state [ ism A ACH & |
Press the MENU button four times | Reads each setting from the EEPROM. [ EEPROM SET ]
EEPROM menu display mode
Press the PLAY/PAUSE button Focus setting menu [ Focus ]
Press the MENU button four times | TEMP setting menu [ Temp ]
Press the PLAY/PAUSE button TEMP setting [ TEMP CO¢¢ ]
40