General Description Of The Unit - Mitsubishi Electric LE-50PAU Instruction Manual

1.2 General description of the unit

The LE-50PAU power amplifire is a compact typeunit designed to be incorporated in the panel, using alu-
minum die cast and plastic cover.
(1)
(11)
(5)'
(10)
(9)
(1)
(1) : Mounting holes arranged at four corners of the main unit, used to fix the unit within the control panel.
(2) : Transparent cover prepared for display unit and operation key.
(3) : 4-digid red 7-segnent display unit used to display the output current / voltage, or to execute each
setting operation.
(4) : operation key used to set the input signal level, non-linearity data, stop gain, stop bias, stop timer,
etc.
(5) : Side cover.
(5)' : Side cover.
(6) : Panel cover. Each cover can be opend by inserting the pawl in the position marked with arrowhead.
(7) : Transparent cover for terminal block.
(8) : Termanal block for input / output and power source. When the right / left mounting screw ara loos-
ened evenly, it is possible to remove the entire terminal block.
(9) : Small window cover for DIP switch. The cover is opend, to see the DIP switch. The DIP switch is
used to set each mode or full-scale value of output current.
(10): Type LE-5AP operator panel connecting connector. The cable is connected by opening the side
cover (5).
(11): LED used to display the power source and cach status.
(2) (3)
POWER
CV
CC
RC
POWER AMPLIFIER
1 2 3 4
SET SP
L N SN
(4)
MODE INC DEC
LE-50PAU
5 6 7 8 9 10
SN ST SC PL 12V S2
SG RS SN RC SN PN PP
(8)
5
SET
S1
(7)
(1)
(5)
(6)
(1)