Table of Contents
Advertisement
Chapter 1 Installing Windows
Using BitLocker
―
Support for NIC teaming in Windows Server 2019
―
Installing bundled software
―
Apply Windows Update
―
If using BitLocker, note the following.
Be sure to keep the recovery password secure. Do not keep it near a server running
BitLocker.
Important
If the recovery password is not entered, the OS cannot be started, and the
content of the partition encrypted by BitLocker cannot be referenced any
more. The recovery password might be required at startup of the OS after
the following:
—
Replacement of motherboard
Change of BIOS setting
—
Initialization of trusted platform module (TPM) *
—
* Depending on your system, it may not be supported.
Refer to the Instruction Manuals about hardware.
To reinstall the operating system into a partition that is encrypted with BitLocker, delete the
BitLocker-encrypted partition prior to reinstallation.
The NIC teaming feature, which used to be provided by network interface card (NIC) vendors, is
built into Windows Server 2019. In Windows Server 2019, this feature is also called "load
balancing and failover (LBFO)".
Refer to Chapter 1 (3.8 Setup of Windows Server 2019 NIC Teaming (LBFO) and specify any
required settings.
When you install software from Applications on Starter Pack menu, confirm each install
procedure beforehand by referring to Installing Bundled Software in Installation Guide
(Windows). Hardware setting may be required, be sure to confirm it.
If the setup completed, apply Windows Update as needed to update the system to the most
recent.
Installation Guide (Windows Server 2019)
3. Installing Windows Server 2019
29
Advertisement
Table of Contents
