Package Size; Table 21 Package Size - Fujitsu ETERNUS AB Series Site Planning Manual

1. ETERNUS AB/HB Installation

Package Size

Package Size
The ETERNUS AB/HB is shipped in cardboard boxes or in a rack. These boxes may not fit through
some doorways or elevators. To make sure that the ETERNUS AB/HB can be moved to the installa-
tion site, carefully check the transport route information.
The following table shows the package size and the maximum package weight of each component.
Table 21 Package Size
Reinforced cardboard for 19-inch racks
Reinforced cardboard for 19-inch wide racks
Controller shelf
(ETERNUS AB2100/AB3100,
AB5100/AB6100, ETERNUS
HB1100/HB1200, HB2100/
HB2200, HB5100)
Controller shelf (ETERNUS HB2300, HB5200)
Drive shelf
Drive (*3)
Power distribution unit
*1: The size includes the ramp (slope) for the crate package.
*2: This value is used when shelves are not installed in the rack.
*3: When an order for optional drives to be installed in the factory is placed, shelves are shipped with the
drives preinstalled. When optional drives are ordered without preinstallation, each drive is shipped in an
individual package.
Component
2.5" type
3.5" type
2.5" type
3.5" type
60-drive type
2.5" type
3.5" type
Package size (W  D  H)
950  1,450  2,190 mm (*1)
1,030  1,550  2,170 mm
(*1)
810  490  710 mm
810  490  710 mm
1,180  690  700 mm
810  490  710 mm
810  490  710 mm
1,180  690  700 mm
160  278  106 mm
189  300  116 mm
(540  380  310 mm)  2
33
Maximum weight
Approximately 240 kg (*1)
(*2)
Approximately 260 kg (*1)
(*2)
44.5 kg
44.5 kg
140.0 kg
44.5 kg
44.5 kg
140 kg
Approximately 0.5 kg
Approximately 1.2 kg
(Approximately 10 kg)  2
Site Planning Guide