Fujitsu ETERNUS AB Series Site Planning Manual page 55

2. Rack Installation Specifications
Installable Racks
(3) Rack space
(Space between the fixed part of the ETERNUS
AB/HB on the front side and the rear of the rack)
(4) Rack mount kit installation area
*1: For the ETERNUS HB2300, ETERNUS HB5200, and DE460C, the recommended depth of the rack
space is equal to the depth of the shelf body (922 mm) + 60 mm or more because the cable connec-
tion interface has depth of 40 mm from the rear surface of the shelf.
■
Installation Requirements
When determining service areas, refer to the manual of the rack that is to be used.
Be sure to perform the installation according to the requirements described in
cations" (page 8)
Specification
and "Installation Environment" (page
The depth of the shelf body (*1) + 100 mm
or more (recommended for the extra
cable length)
483 mm or more (recommended)
36).
55
Condition
"Installation Specifi-
Site Planning Guide