ACH550-01 User's Manual
Suitable mounting location
Confirm that the mounting location meets the following
constraints:
•
The drive must be mounted vertically on a smooth,
non-flammable, solid surface or frame, and in a suitable
environment as defined in section
enclosure
•
For horizontal installation, contact your local ABB
representative for more information.
Mounting on a machine frame is also possible. No additional
plates are needed for cooling as the drive has an integral
heatsink backplate.
See section
dimensions for all frame sizes and protection types.
The figure below shows the necessary free space for the
installation of the unit.
IP21 & IP54: 0 mm [0 in]
Preparing for installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
on page 22.
Mounting dimensions
IP21 & IP54: 200 mm [8 in]
IP21 & IP54: 200 mm [8 in]
Suitable environment and
on page
421
for mounting
IP21 & IP54: 0 mm [0 in]
23