Table of Contents
Advertisement
ACH550-01 User's Manual
Parameter listing and descriptions
What this chapter contains
This chapter contains the parameter listing of predefined
application macros and descriptions of individual parameters for
the ACH550.
Parameter groups
The parameters are grouped as follows:
•
Group 99: START-UP DATA
set up the drive and enter motor information.
•
Group 01: OPERATING DATA
including actual signals.
•
Group 03: FB ACTUAL SIGNALS
communications.
•
Group 04: FAULT HISTORY
reported by the drive.
•
Group 10: START/STOP/DIR
commands that enable start, stop and direction changes.
Locks direction or enables direction control.
•
Group 11: REFERENCE SELECT
selects between command sources.
•
Group 12: CONSTANT SPEEDS
speeds.
•
Group 13: ANALOGUE INPUTS
filtering for analogue inputs.
•
Group 14: RELAY OUTPUTS
activate relay outputs.
•
Group 15: ANALOGUE OUTPUTS
analogue outputs.
•
Group 16: SYSTEM CONTROLS
locks, resets and enables.
•
Group 17: OVERRIDE
override activation signal, override speed/frequency and
pass code.
•
Group 20: LIMITS
for driving the motor.
Parameter listing and descriptions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
– Defines the data required to
– Contains the operating data
– Monitors fieldbus
– Stores a recent fault history
– Defines external sources for
– Defines how the drive
– Defines a set of constant
– Defines the limits and
– Defines the conditions which
– Defines the drive's
– Defines system level
– Defines override enabling/disabling,
– Defines minimum and maximum limits
165
Advertisement
Table of Contents
