Toshiba D-R5SU Owner's Manual page 44

Startin¢ and Endinc Times
By default, the Start and End times are set to the
current time and one hour later, respectively. The
Start and End dates are set to the current date.
To change a time or date field, use the A/rand
< / I_ keys to navigate the screen. To select a field
to change, press ENTER.
A
I mooPMI
v
With Time fields, select the 9's or O's digit to
change, with increments of 10 minutes or 1
minute, respectively.
I 08:0_PM I
Press ENTER to save your changes and exit edit
mode for the current field.
the Source
1
To select an input source or TV channel to record,
use the ._./v keys. For TV channels, use the
number keys to specify your selection.
l< Video2•}
Select Recurrence with the < /
a
option keys.
[ _ Daily • }
The Recurrence setting indicates when the scheduled
recording will take place or repeat.
Once (No Repeat) - One time recording, specify a
Time, Date, etc. This event is deleted after the recording.
Daily - The recording is repeated every day and the
date setting is ignored.
Weekly - The recording is repeated once each week
on the day specified in the Start and End times.
, Mode
1
Specify the Recording Quality mode you wish to
use for the recording with the 4 / ) keys. (
page 51)
[ • SP(2hours) •}
Select Add and press ENTER to add the entry
to the schedule list when all parameters are set.
To Cancel adding a new schedule, use i, to
move to the Cancel field and press ENTER.
To exit the Schedule Screen, press REC MENU.
I Schedute Feb 12, 2005 - 08:00PM ]
_l Startlngtlme H Length
IlSourcellstatus II
Use the A/v keys to select the entry you wish
to edit.
Use the _ / _ keys to select the Edit Recording
iCOn and press
ENTER.
%
Edit the schedule's settings with the same
procedure outlined earlier for new recordings.
Exit the Schedule Screen at any time by
pressing REC MENU.
Temporarily suspend a recording schedule and then
enable it again with the Schedule Screen's Action
Menu.
Press REC MENU to the Schedule Menu.
access
Use theA/v keys to select the entry you wish to
suspend or activate.
Use the 4 / l, keys to select the Suspend/Ready
icon. If the schedule you selected is currently
enabled, press ENTER to disable the schedule.
% i-0- i-=711- -TI i- -i
Notice the icon to the left of the schedule number.
The Status will also change to Suspend.
To activate a suspended event, select this icon with
the < / _ keys and press ENTER.
The icon to the left of the schedule disappears and
the Status displays Ready.
Press REC MENU to access the Schedule Menu.
Use theA/v keys to select the entry you wish to
delete.
Use the < / l, keys to select the Delete icon and
press ENTER.
% I-0- raTI I- -q
Press REC MENU to exit the Schedule Screen.
Editinc a Saved Schedule
To change a recording schedule, press the
REC MENU key to access the Schedule Screen.
44