Reshipment Instructions - HP 30020B Installation And Service Manual

b. Turn off the system power·.
I
CAUTION
I
All power must be off when inserting
or removing any device or card in the
system.
Maintenance
c. Disconnect the cable hood connector and the ribbon cable con-
nector from the edge of the INP PCA board.
d. Remove the INP PCA board {part no. 30020-60009) from the com-
puter card cage.
e. Install the factory replacement INP PCA board in the same
slot in the computer card cage, using the procedure described
under "Hardware Installation Procedures" in Section II, In-
stallation.
f. Verify that the INP is now working properly as
described
under "Installation Verification• in Section II, Installa-
tion.
4-19. RESHIPMENT INSTRUCTIONS
If the INP PCA and/or the associated cables are to be shipped to_
Hewlett-Packard for service or repair, attach a tag to each item
identifying the owner and indicating the type of service or re-
pair to be accomplished. Include the part number and date code
of each item.
Package the item{s) in the original factory packaging material,
if available. If the original packaging material is not avail-
able, standard factory packaging material can be obtained from
the nearest Hewlett-Packard Sales and Service Off ice. If
standard packaging material is not available, wrap the item(s) in
suitable cushioning material (Air Cap TH-240 Cushioning or
equivalent) and place the item(s) in a corrugated carton (200-
pound test material). Seal the carton securely and mark it
FRAGILE to ensure careful handling.
4-13