Configuring MPE
THE CONFIGURATION DIALOGUE
The following instructions deal only
with
configuring
an
INP.
The
complete
configuration
dialogue
is
given
in
the System
Manager / System Supervisor Reference Manual.
To begin, log onto the
system,
define
the
output
files,
and
initiate a SYSDUMP as shown:
NOTE
Where it is necessary to distinguish
user input from computer output, the
input is underlined.
:HELLO MANAGER.SYS
:FILE T;DEV=TAPE
:FILE L;DEV=LP
:SYSDUMP *T,*L
Step No.
Prompt and Response
1.
ANY CHANGES? YES
2.
SYSTEM ID=HP 32002 v.uu.ff? return
3.
MEMORY SIZE? return
4
I/O CONFIGURATION CHANGES? YES
5
LIST I/O DEVICES? YES or NO
6
LIST CS DEVICES? YES or NO
7
HIGHEST ORT = xx.?
xx is the current highest hardware device address
that
can
be
assigned.
Press RETURN if xx is satisfactory.
Otherwise, enter a higher ORT number.
A-2