Advertisement
@ Using Rear Support Strap 2)
Affix one end of Rear Support Strap .2' to the rear of the unit, and the other end to the fire wall of
the car, or some other metallic area.
@ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the fire wall of the car.)
Cover the Mounting Bolt '5) on the rear of the unit with the Rubber Cushion (Optional), and mount
it into the existing Rear Support Bracket.
HSITDNZ
:
Rubber Cushion";
(3) Tapping Screw
"\
3mm)
(Optional)
Od
{
2
.._ 6 Hex. Nut
&
2. Rear Support
}
5! Mounting Bolt
Strap
1) Mounting Collar
5! Mounting Bolt
1) Mounting Collar
4. INstall Trim Plate 5.
U Attaching the Remote Control Holder
1. Attach the double-sided tape (included) to the
back of the Remote Control Holder '12.
Double-sided tape for the
~
Remote Control Holder
(20 mm x 50 mm)
12 Remote Control
Holder (included)
2. Remove the backing from the double-sided
tape, then press the Remote Control Holder
onto the surface where you want to attach it.
13 Remote Control Unit -
12 Remote Control Holder
€
a
85
Advertisement
