Table of Contents
Advertisement
SAFETY
WORK UNDER THE MACHINE
If it is necessary to go under the work equipment or the
machine to carry out service and maintenance, support the
work equipment and machine securely with blocks and
stands strong enough to support the weight of the work
equipment and machine.
It is extremely dangerous to work under the machine if the
track shoes are lifted off the ground and the machine is sup-
ported only with the work equipment. If any of the control
levers is touched by accident, or there is damage occurring
to the hydraulic piping, the work equipment or the machine
will suddenly drop. This is extremely dangerous. Never
work under the work equipment or the machine.
NOISE
When carrying out maintenance of the engine and you are exposed to noise for long periods of time, wear ear cov-
ers or ear plugs while working.
If the noise from the machine is too loud, it may cause temporary or permanent hearing problems.
WHEN USING HAMMER
When using a hammer, pins may fly out or metal particles may
be scattered. This may lead to serious injury. Always do as fol-
lows.
If hard metal parts such as pins, bucket teeth, cutting edges,
or bearings are hit with a hammer, there is a hazard that
pieces might be scattered and cause injury. Always wear
safety goggles and gloves.
When hitting pins or bucket teeth, there is a hazard that bro-
ken pieces might be sent flying and injure people in the sur-
rounding area. Always check that there is no one in the
surrounding area.
There is a hazard that the pin hit with strong force may fly out and injure people in the surrounding area.
WELDING WORKS
Welding operations must always be carried out by a qualified welder and in a place equipped with proper equip-
ment. There is a hazard of gas, fire, or electrocution when carrying out welding, so never allow any unqualified
personnel to carry out welding.
REMOVING BATTERY TERMINALS
When repairing the electrical system or when carrying out electrical welding, remove the negative (-) terminal of
the battery to prevent the flow of current.
SAFETY MAINTENANCE INFORMATION
0.
0.
0.
0.
0.
2-33
Advertisement
Table of Contents
