Wm800 Rsm Pairing; Pairing Your Wm800 Rsm Through Secure Nfc (Recommended For Higher Security Level) - Motorola WM800 User Manual

Table 12: LED and Tone Indications for Power On or Off
Power Power or Battery
LED Indication
On Blinking green for
one second
Off Blinking green
twice
2.3.2

WM800 RSM Pairing

2.3.2.1
Pairing Your WM800 RSM Through Secure NFC (recommended
for higher security level)
Prerequisites: Ensure that your WM800 RSM is off.
Procedure:
1. Press and hold the Power button until you hear the "Power On" followed by "Searching for Host" voice
prompt and see that the Audio or Bluetooth LED blinks blue.
2. Select NFC Touch Pairing on the radio System settings and follow the instructions to complete the
pairing process.
3. Align the NFC tag from the WM800 RSM and the M logo at the back of the radio together until you
hear a beep tone indicating successful detection. Hold the devices together to complete the pairing
process.
2
Applicable if the WM800 RSM is set to Tone
3
Applicable if the WM800 RSM is set to Voice Prompt
Chapter 2: WM800 Remote Speaker Microphone
Audio or Bluetooth
LED Indication
● Solid blue during
connection status
● Blinking blue in
Pairing Mode
MN010200A01-AC
Tone Indica- Voice Prompt
2
tion
Power Up
● "Power On"
tone
● "RSM
<Battery
Status>"
● "<Connection
Status>"
Power Down "Power Off"
tone
3
29