Setting Volume; Using The Task Light; Activating Dark Mode - Motorola WM800 User Manual

2.3.6

Setting Volume

You can change up to 16 volume levels in the WM800. When using the device for the first time, the volume is
set to the default level upon powering up. The device retains the previously set volume level for subsequent
uses.
Procedure:
1. To decrease the volume, short press the - button. Press and hold the - to continuously decrease the
device volume until it reaches the minimum level.
2. To increase the volume, short press the + button. Press and hold the + to continuously increase the
device volume until it reaches the maximum level.
2.3.7

Using the Task Light

Prerequisites: Ensure that your WM800 RSM is on or in the connected state.
Procedure:
Press the Task Light button for one second to turn on or off the task light.
NOTE:
● The task light blinks for 30 seconds and is automatically switched off during low or critical battery
levels.
● The task light is off when WM800 RSM is in Dark Mode.
2.3.8

Activating Dark Mode

Dark Mode allows you to turn off the LEDs on the WM800 RSM. In Dark Mode, all indications are turned off
by the WM800 RSM.
Prerequisites: Ensure that your WM800 RSM is turned on.
Procedure:
Press and hold the Task Light button until Dark Mode is turned on.
The task light blinks for one second after entering or exiting Dark Mode.
NOTE: To disable the Dark Mode feature, press the Task Light button for three seconds.
Chapter 2: WM800 Remote Speaker Microphone
MN010200A01-AC
33