Installation; Before Installation; Installation And Connection Crc - Beko BD 531 A User Manual

Double cavity
Table of Contents

Advertisement

Product must be installed by a qualified person in
accordance with the regulations in force. The
manufacturer shall not be held responsible for
damages arising from procedures carried out by
unauthorized persons which may also void the
malian
Pe
Wrreparation of location and electrical and
E
joas installation for the product is under
Mcustomer's responsibility.
‚The product must be installed in
'accordance with all local gas and/or
electrical regulations.
Prior to installation, visually check if the
product has any defects on it. If so, do
not have it installed.
Damaged products cause risks for your
safety.
Before installation
To ensure that critical air gaps are maintained
under the appliance, we recommend that this
appliance is mounted on a solid base and that the
feet do not sink into any carpet or soft flooring.
The kitchen floor must be able to carry the weight
of the appliance plus the additional weight of
peu tele and bakeware and food.
|
65 mm min
(=) 650 mm
min.
=
~ | 400mmmin
jy
e
ltcan be used with cabinets on either side
but in order to have a minimum distance of
400mm above hotplate level allow a side
clearance of 65mm between the appliance
and any wall, partition or tall cupboard.
e
Itcan also be used in a free standing position.
Allow a minimum distance of 650 mm above
the hob surface.
e
() If a cooker hood is to be installed above
the cooker, refer to cooker hood
manufacturer' instructions regarding
installation height (min 650 mm),
e
Movement of your appliance is most easily
achieved by lifting the front as follows and
pulling towards. Open the top oven door and
the bottom oven door sufficiently to allow a
comfortable grip on the underside front edge
of the oven roofs. While gripping, it should be
avoided to damage any grill elements or oven
interior furniture.
e
The appliance corresponds to device class 1,
i.e. it may be placed with the rear and one
side to kitchen walls, kitchen furniture or
equipment of any size. The kitchen furniture
or equipment on the other side may only be
of the same size or smaller.
e = Any kitchen furniture next to the appliance
must be heat-resistant (100 °C min.).
Installation and connection
Product can only be installed and connected in
accordance with the statutory installation rules.
ADO not install the appliance next to
{refrigerators or freezers. The heat emitted
by the appliance will lead to an increased
energy consumption of cooling appliances.
e
Carry the product with at least two persons.
e
Product must be placed directly on the floor.
It must not be placed onto a base or a
pedestal.
y
WWaterial damage!
The door and/or handle must not be used
or lifting or moving the appliance.

Advertisement

Table of Contents
loading

Table of Contents