Preparation; Tips For Saving E O Idas; Ina Use Ee; First Cleaning Of The Appliance - Beko BD 531 A User Manual

Double cavity
Table of Contents

Advertisement

Tips for saving energy
The following information will help you to use your
appliance in an ecological way, and to save energy:
e
Use dark coloured or enamel coated cookware in
the oven since the heat transmission will be better.
e
While cooking your dishes, perform a preheating
operation if it is advised in the user manual or
cooking instructions.
e
Do not open the door of the oven frequently during
cooking.
e
Try to cook more than one dish in the oven at the
same time whenever possible. You can cook by
placing two cooking vessels onto the wire shelf.
e
Cook more than one dish one after another. The
oven will already be hot.
e
You can save energy by switching off your oven a
few minutes before the end of the cooking time.
Do not open the oven door.
e
Defrost frozen dishes before cooking them.
e
Use pots/pans with cover for cooking. If there is no
cover, energy consumption may increase 4 times.
e
Select the burner which is suitable for the bottom
size of the pot to be used. Always select the
correct pot size for your dishes. Larger pots require
more energy.
e _ Pay attention to use flat bottom pots when cooking
with electric hobs.
Pots with thick bottom will provide a better heat
conduction. You can obtain energy savings up to
is.
e
Vessels and pots must be compatible with the
hotplates. Bottom of the vessels or pots must not
be smaller than the hotplate.
e
Keep the hotplates and bottom of the pots clean.
Dirt will decrease the heat conduction between the
hotplate and bottom of the pot.
e
For long cookings, turn off the hotplate 5 or 10
minutes before the end of cooking time. You can
obtain energy savings up to 20% by using the
residual heat.
Initial use
First cleaning of the appliance
e
4 [he surface may get damaged by some
{detergents or cleaning materials.
Do not use aggressive detergents, cleaning
powder/cream or any sharp objects.
1. Remove all packaging materials.
2. Wipe the surfaces of the appliance with a
damp cloth or sponge and dry with a cloth.
Initial heating
Heat up the product for about 30 minutes and then
switch it off. Thus, any production residues or
layers will be burnt off and removed.
ARNING
Hot surfaces may cause burns!
'Do not touch the hot surfaces of the
appliance. Use oven gloves. Keep children
away from the appliance.
Electric oven
1. Take all baking trays and the wire grill out of
the oven.
2. Close the oven door.
3. Select the highest oven power; See How to
operate the electric oven, page 15.
4. Operate the oven for about 30 minutes.
5. Turn off your oven; See How to operate the
electric oven, page 15
Grill
1. Take all baking trays and the wire grill out of
the oven.
2. Close the grill door.
3.
Select the highest power for grill; See how
to operate the grill, page 17
4. Operate the grill about 30 minutes.
5. Turn off your grill; see how to operate the
grill, page 17
Hot plate
1. Any production residues or conservation layers
must be burnt before the first use. Operate the
hotplate at middle temperature level for 8
minutes without any vessel on it. No pots or
containers should be placed onto the hotplate
during this procedure.
Pe
"Smell and smoke may emit during first
i
jneating. Ensure that the room is well
Bo...
entilated.

Advertisement

Table of Contents
loading

Table of Contents