Table of Contents
Advertisement
/, Route the power cable so that it wil not
contact the product and gel squeezed between
the product and the wall.
|
Power cable must not be longer than 2
Í
im because of safety reasons.
Push the product towards the kitchen wall.
Adiusting the fest of oven
Vibrations during use May cause cooking
vessels to move. This dangerous situation can
be avoided if the product is level and
balanced.
For your own safety please ensure the
product is level by adjusting the four feet at
ihe bottom by turning left or right and allan
level with the work top.
Final check
1. Reconnect the product to the mains.
2. Check electrical functions.
Compliance with EEE Directive
This product does not contain harmful and
forbidden materials described in the "Directive on
the Restriction of the Use of Certain Hazardous
substances in Electrical and Electronic Equipment"
(EEE) issued by the T.R. Ministry of Environment
and Forest.
Complies with the EEE Directive.
Package information
Packaging materials are dangerous to children.
Keep packaging materials in a safe place out of
reach of children.
Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations.
Do not dispose of the packaging materials together
with the domestic or other wastes. Take them to
the packaging material collection points
designated by the local authorities.
11/EN
Future Transportation
e
Keep the product's original carton and trans-
port the product in it. Follow the instructions
on the carton. If you do not have the original
carton, pack the product in bubble wrap or
thick cardboard and tape it securely.
e
To prevent the wire grill and tray inside the
oven from damaging the oven door, place a
strip of cardboard onto the inside of the oven
door that lines up with the position of the
trays. Tape the oven door to the side walls.
e
Do not use the door or handle to lift or move
the product.
‚ "Do not place other items on the top of the
jeppliance. The appliance must be
Check the general appearance of your
inroduct for any damages that might have
occurred during transportation.
Dispose of the old product in an environmentally
friendly manner.
This equipment bears the selective sorting symbol
for waste electrical and electronic equipment
(WEEE). This means that this equipment must be
handled pursuant to European Directive
2002/96/EC in order to be recycled or dismantled
to minimize its impact on the environment. For
further information, please contact local or regional
authorities.
Refer to your local dealer or solid waste collection
centre in your area to learn how to dispose of your
product.
Before disposing of the product, cut off the power
cable plug and make the door lock (if any)
unusable to avoid dangerous conditions to children.
Advertisement
Table of Contents
