Installing The I/O Cover - Dell Inspiron 27 7720 All-in-One Owner's Manual

Figure 19. Removing I/O cover
Steps
1. Remove the five screws (M3x5) that secure the I/O cover to the display-assembly base.
2. Lift the I/O cover off the display-assembly base.

Installing the I/O cover

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the I/O cover and provides a visual representation of the installation procedure.
Removing and installing Customer Replaceable Units (CRUs) 47