Advertisement
<Note>
* Do not allow contact between the lead wire of the speaker body
and the screw. (Do not put the lead wire beneath the screw head
as shown in @.)
* Insert the speaker wire (8, A) into the groove in the upper cabinet.
(5) LCD unit attachment
* Insert FPC terminal ® into chassis A @, insert concave section ©)
of the LCD holder into the projected section © in chassis A, and
fix with screw ©.
(6) Tablet unit attachment
* Pass the tablet unit pressure section through chassis A and attach
section @.
* Fit the tablet mask extemal shape (upper side) with chassis A
external shape. (B, C)
=
<Note> Attach the tablet protection sheet in the arrow direction and
do not apply a pressure on pressure section ©).
(7) Connector cover attachment
Advertisement
