Items To Be Prepared By Customer - Mitsubishi Electric MELFA CR800 Series Instruction Manual

Items to be prepared by customer

2.1.2
Items to be prepared by customer for the CR800 series controller
Tab. 2-2 Items to be prepared by customer for the CR800 series controller
No. Item
1
24 V power supply
2
24 V power cable
3
FG cable
4
Safety extension
unit installation
metal plate
5
24 V power supply
installation metal
plate
6
Fixing screw
■Connected to 24V power supply
Connectors/cables: Table 2-5 Connectors and cables
Connector Pin Assignment: Table 3-5 DCIN pin assignment
Quantity
The power supply for the safety
1
extension unit.
This is used to supply the safety
-
extension unit with the 24 V power.
Assemble the cable with the included
DCIN connector set.
Make a cable that connects to the
1
frame ground.
Fabricate a metal plate to install the
1
safety extension unit inside the
CR860.
When the unit is used with the
CR800, no fabrication is required.
A metal plate to install the 24 V
1
power supply inside the CR860.
Fabricate it when installing the 24 V
power supply inside the CR860.
When installing the 24 V power
supply outside the CR860, no
fabrication is required.
A screw to fix the safety extension
-
unit, installation metal plate, etc.
Prepare screws by referring to the
information described in this manual.
Fig. 2-1 Power supply connection
Description
2 INSTALLATION
Remarks
Refer to 8.1 Appendix 1:
Selection Conditions for
24VDC Stabilized Power
Supply.
-
-
Refer to 8.2 Appendix 2:
How to Install the Safety
Extension Unit.
Refer to 8.3 Appendix 3:
How to Install the
Stabilized Power Supply
for the Safety Extension
Unit.
-
Product Components 2-9