Replaceable Parts; Introduction; Ordering Information - HP 12606B Operating And Service Manual

12606B Section VI
SECTION VI
REPLACEABLE PARTS
6-1_ INTRODUCTION.
6-2. This section provides information for ordering
replacement parts for the 12606B Disc Memory Interface
Kit. Table 6-1 is a total-quantity listing of all replaceable
parts in the kit.
6-3. Reference designation indexes (tables 5-2 and 5-4)
and parts location diagrams (figures 5-2 and 5-4) for the
data channel interface card and the command channel
interface card are provided in section V of this manual
adjacent to the logic diagram for each card.
6-4. Tables 5-2, 5-4, and 6-1 list the following informa-
tion for each replaceable part:
a. Reference designation of the part (tables 5-2 and
5-4 only). Refer to table 6-2 for an explanation of abbrevia-
tions used in the REFERENCE DESIGNATION column.
b. Hewlett-Packard part number.
c. Description of the part. Refer to table 6-2 for an
explanation of abbreviations used in the DESCRIPTION
column.
d. A five digit code that corresponds to the manu-
facturer of the part. Refer to table 6-3 for a listing of the
manufacturers that correspond to the codes.
e. Manufacturer's part number.
f. Total quantity (TQ) of each part used in the kit or
assembly (table 6-1 only).
6-5. ORDERING INFORMATION.
6-6. To order replacement parts, address the order or
inquiry to the local Hewlett-Packard Sales and Service
Office. (Refer to the list at the end of this manual for
addresses.) Specify the following information for each part
ordered:
a. Identification of the instrument, kit, or assembly
containing the part (refer to paragraph 1-9).
b. Hewlett-Packard part number for each part.
c. Description of each part.
d. Circuit reference designation (if applicable).
6-1