Mitsubishi Electric GOT DRIVE GOT2000 Manual page 11

Notes on sample screens
Depending on your system configuration (P.5-) and servo amplifier, there are cases where the sample screens may not be supported. In such cases,
please refer to "User-created screen" on page 45. The sample screens are updated as necessary. The actual sample screens may be different from
those in this catalog, and some function screens are not listed. If you wish to obtain the latest sample data, please contact your local sales office.
GT27/GT25
Controllers connected directly to GOT and GT SoftGOT2000
CASE
Connection
Name
type
J4- MR-J4-A/
RS-422 Servo amplifier
CASE1 MR-J4-A-RJ
RCPU
Serial, Programmable
FX5CPU
J4-
Ethernet, controller CPU+
CASE2
QCPU
etc. Simple motion module
LCPU
RCPU
Serial, Programmable
J4-
Ethernet, controller CPU+ QCPU
CASE3
etc. Motion controller
QCPU
Programmable
RCPU
controller
CPU+ CC-Link IE
Field Network
QCPU
Simple Motion module
Programmable
RCPU
controller
Serial,
J4- CPU+ CC-Link IE QCPU
Ethernet,
Field Network
CASE4
etc.
LCPU
Master/local module
CC-Link IE built-in
RENCPU
CPU module
Programmable
controller CPU+
RCPU
CC-Link IE built-in
Ethernet module
*1 In case you use the "Intelligent module monitor function" in the dedicated screen, you need to add a wiring between the programmable controller and the GOT.
*3 The sample screen is set up based on a specific system configuration, such as the GOT being connected to a programmable controller CPU and the servo amplifier being controlled by a
motion module. When using the sample screen, it is necessary to change the settings to match the actual system configuration. Please use the sample screen for GT27**-V (640×480).
*4 The dedicated screen differs depending on the system configuration and the servo amplifier. For details, please refer to the GOT2000 Series Connection Manual (Mitsubishi Electric
Products) and the GOT2000 Series User's Manual (Monitor).
System Configuration
Command
Model type
interface
Programmable
Pulse train
controller CPU+
(serial)
Positioning module
RD77MS
FX5-SSC-S
SSCNET III/H Servo amplifier
QD77MS
LD77MS
RMTCPU
Q17DSCPU SSCNET III/H Servo amplifier
Q170MSCPU
RD77GF
QD77GF
RJ71GF11-T2
QJ71GF11-T2 CC-Link IE
Servo amplifier
Field Network
LJ71GF11-T2
RJ71EN71
Controller/Servo amplifier
Name Model type
MELSEC iQ-R Series
Programmable controller CPU+
RD75D, etc./
MELSEC iQ-F Series
Programmable controller CPU
(built-in positioning function)/
MELSEC iQ-F Series
Programmable controller CPU+
FX5-20PG-P, etc./
MELSEC-Q Series
Programmable controller CPU+
QD75D/
MELSEC-L Series
Programmable controller CPU+
LD75D, etc./
MELSEC-F Series
Programmable controller CPU
(built-in positioning function)/
MELSEC-F Series
Programmable controller CPU+
FX3U-1PG, etc.
MR-J4-B/
MR-J4-B-RJ/
MR-J4W2-B/
MR-J4W3-B
MR-J4-B/
MR-J4-B-RJ/
MR-J4W2-B/
MR-J4W3-B
MR-J4-GF/
MR-J4-GF-RJ
: Supported —: Not supported
User- FA trans-
Sample Dedicated
created parent
screen screen
screen function
* *
1 4
   —
*
4
   —
*
4
— —
 
* *
3 4
—
  
*
— 4 —
 
* *
3 4
   
* *
3 4
   
*
— 4
  
*
4
— —
 
*
4
 —  —
*
4
— —
 
*
4
— —
 
2
11