Table of Contents
Advertisement
This section outlines the technical and environmental specifications of your VxRail.
The VxRail VD-4510c compute sled supports the processor, battery, storage controller, and drive specifications:
Component
Processor
Battery
Storage controller
Drives
The VxRail VD-4510c supports the following memory specifications for optimized operation:
DIMM type
DIMM rank
RDIMM
Dual rank
LRDIMM
Quad rank
The VxRail VD-4510c supports four 288-pin memory module sockets that operate at a speed of 3200 MT/s.
NOTE:
Memory DIMM slots are not hot swappable.
Sled dimensions and weight
Sled dimensions and weight are provided.
The following figure and table provides the dimensions of VxRail VD-4510c sled:
32
Technical specifications
Specification
One Third Generation Intel Xeon D Scalable processor with up to 16 cores
CR 2032 3.0-V Lithium coin cell system battery
Boot Optimized Storage Subsystem (BOSS-N1): 2 x M.2 SSD as internal boot
4 x M.2 SSDs (M.2 2280 and M.2 22110) installed on M.2 riser module and one disk group
configuration with 1 cache drive and up to 3 capacity drives
DIMM capacity
16 GB
32 GB
64 GB
128 GB
Technical specifications
Single processor
Minimum system capacity
16 GB
32 GB
64 GB
128 GB
6
Maximum system
capacity
64 GB
128 GB
256 GB
512 GB
Advertisement
Table of Contents
