X
167.2 mm (6.58 in)
The following table shows the maximum weight of the VxRail VD-4510c sled:
System configuration
4 x DIMMS, 4 x M.2 NVMe SSDs on M.2 Riser, 2 x M.2 NVMe SSDs
on BOSS N1
1 x DIMM, 1 x M.2 NVMe SSD on M.2 Riser, 1 x M.2 NVMe SSD on
BOSS N1
Cooling fan specifications
The VxRail VD-4510c supports up to three standard cabled fans with normal and reverse air flow.
Fan type
Standard (STD) fans with 60
mm (2.36 in) cable length
Ports and connectors specifications
Specifications for the USB, NIC, serial connector, display, and iDRAC9 ports are provided.
The following table shows the USB specifications of VxRail VD-4510c:
USB port type
USB 3.0-compliant port
Micro-AB USB 2.0-compliant port
for iDRAC Direct
The VxRail VD-4510c supports the following:
● Up to four NIC ports embedded on the LOM card. The LOM card specifications are: 10 GbE x 4 (max 50 Gb), 25 GbE x 4
(max 100 Gb).
● One Micro-USB debug port for Universal Asynchronous Receiver or Transmitter (UART) in front of the compute sled.
● One Mini-DisplayPort on the front.
● One RJ45 with port status LEDs for iDRAC9 remote management (dedicated port only) in the front.
Video specifications
The VxRail VD-4510c supports integrated Matrox G200 graphics controller embedded in the iDRAC(BMC) chip, with 16 MB of
video frame buffer.
The following table describes the supported video resolution options:
Label color
Label image
No label
Front
Ports
Two
One
Y
41.25 mm (1.62 in)
Maximum weight (with all SSDs)
2.46 kg (5.42 lbs)
2.35 kg (5.18 lbs)
USB port type
Internal USB 3.0-
compliant port
Z (handle closed)
342.5 mm (13.48 in)
Internal (optional)
Ports
One
Technical specifications
33