Chapter 8: Jumpers And Connectors - Dell VxRail VD-4510c Manual

Information about jumpers and switches are provided, including a description of the connectors on the various boards in the
system. Jumpers on the system board help to disable the system and reset the passwords. To install components and cables
correctly, you must know the connectors on the system board.
DIP switches are installed on the system board that helps the user to disable the system and reset the passwords. To set the
switches correctly, you must know the location on the system board.
The following figure shows the system board DIP switches:
1. Power Connector
3. DIMMs for CPU
5. SPF I/O 25G Connector
7. DIP switches
9. Smart NIC Connector
11. USB 3.0
13. iDRAC port
15. UID BTN
17. Bezel Pogo-pin connector
19. M.2 Riser_1 Connector
42 Jumpers and connectors
Jumpers and connectors
2. PCIE Riser_2 Connector
4. CPU
6. PCIE Riser_1 Connector
8. Coin cell battery
10. USB Serial Port
12. SFP I/O Sideband Connector
14. Display Port
16. iDRAC Direct
18. PWR BTN
20. Internal USB
8