Removing The Sim Card Door; Removing The Knob; Figure 11: Sim Card Door Removal - Motorola MTP8500Ex Basic Service Manual

MN002465A01-AN
Chapter 5 : Maintenance
5.5.2.6

Removing the SIM Card Door

Prerequisites:
Recommended tools:
• T-5IP torx-plus bit
• Torx driver
Refer to the Torque Specification Chart
Procedure:
1 Remove the battery.
2 Using the torx driver with the T-5IP torx-plus bit, unscrew the two screws fastening the SIM card
door.
3 Remove the SIM card door from the back chassis.

Figure 11: SIM Card Door Removal

Annotation
1
2
5.5.2.7

Removing the Knob

The procedures below are for removing the knob.
62
for torque values.
4
Description
SIM card door
SIM card door screws
3
1
2