Table of Contents
Advertisement
Available languages
Available languages
Cleaning
DANGER
Risk of fatal injury from electrocution!
►
Remove the plug from the mains power socket before beginning to clean
the device .
►
Ensure that no moisture can penetrate the device during cleaning .
CAUTION
Possible damage to the appliance .
►
Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing .
►
Do not use any hard or sharp objects to remove any adhesive from the
welding wire 4 . Otherwise the welding wire 4 or the insulation could
be damaged .
Cleaning the appliance
♦
Clean the surface of the housing of the appliance with a lightly moistened
cloth and a mild detergent .
♦
Wipe off the upper 0 and the lower sealing rings 5, as well as the press
seal q with a damp cloth . Ensure that the appliance is dry before using it again .
♦
Wipe the vacuum hoses u/p, the suction cup i and the adapters o/a/
s/d with a damp cloth . If there is heavy soiling, you can also clean these
parts in hot water with a little detergent . Ensure that all components are
completely dry before the next use .
♦
Clean the drip tray that is located between the lower sealing ring 5 in warm
water with a little detergent .
SV 120 A1
You can also clean the drip tray in the dishwasher, if required . Make
sure that the drip tray does not get jammed in the dishwasher . Use
the upper basket in the dishwasher if possible .
GB │ IE │ NI │ CY
│
13
■
Advertisement
Chapters
Table of Contents
