Cleaning; Cleaning The Appliance - Silvercrest 416131 2210 Operating Instructions Manual

Vacuum sealing containers
1) Connect the vacuum hose u onto the suction fitting
2) Select the appropriate adapter i/o/p for the container you want to
vacuum and attach it to the vacuum hose u .
3) Close the appliance lid 1 . Ensure that both corners of the appliance lid 1
click closed . If necessary, press them down once again on the markings
and
4) Connect the adapter i/o/p to the appropriate fitting on the container .
Please refer to the instruction manual of the container for further information .
5) Press the
sucks the air out of the container . As soon as all the air is sucked out, the
control lamp z goes out .
6) You can now remove the adapters i/o/p from the container and the
appliance .

Cleaning

DANGER
Risk of fatal injury from electrocution!
► Remove the plug from the mains power socket before beginning to clean
the device .
► Ensure that no moisture can penetrate the device during cleaning .
CAUTION
Possible damage to the appliance .
► Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing .
► Do not use any hard or sharp objects to remove any adhesive residue from
the sealing wire 4 . Otherwise, the sealing wire 4 and/or the insulation
could be damaged .

Cleaning the appliance

♦ Clean the surface of the housing of the appliance with a lightly moistened
cloth and a mild detergent .
♦ Wipe off the upper 0 and the lower sealing rings 5, as well as the press
seal q with a damp cloth . Ensure that the appliance is dry before using it again .
♦ Wipe the vacuum hoses u, and the adapters i/o/p with a damp cloth . If
there is heavy soiling, you can also clean these parts in hot water with a little
detergent . Ensure that all components are completely dry before the next
use .
■ 16 │ GB │ IE
so that the appliance lid 1 clicks into place and locks shut .
button z . The control lamp z lights up and the appliance
9 of the appliance .
SV 125 C6