Table of Contents
Advertisement
Resetting the Projector
If the image quality isn't what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Setting menu), open that
menu, select
Image menu:
Open the Image
menu . . .
You can also reset the lamp usage timer, clear the memory settings, or restore all the projector
settings to their original values. Follow these steps:
1. Press the
2. Open the
3. Do one of the following:
■
Select
(see page 53 for more information).
■
Select
page 31.
■
Select
Note: All Reset does not reset the lamp timer, menu language, Input Signal, and memory
settings.
32
, and confirm as needed. The example below shows how to reset the
Reset
button on the remote control.
Menu
menu.
Reset
Lamp-Hours Reset
to clear any memory settings you created, as described on
Memory Reset
to return almost all projector menus to their original settings.
All Reset
to clear the lamp usage timer and reset it to zero
. . . and select
Reset
Advertisement
Table of Contents
