Managing Your Settings - Epson PowerLite Cinema 200+ User Manual

Managing Your Settings

In addition to your projector's twelve memory settings (six standard and six advanced), you
can store any number of settings on your computer's hard drive. You can also use Cinema
Color Editor to rename or delete memory settings stored on your projector.
To save or recall settings on your computer:
In Cinema Color Editor, open the
■ Save setting
to store the current Cinema Color Editor settings on your computer's hard
drive.
■ Set from file
to adjust the picture from settings previously saved on your hard drive.
Note: You can also transfer settings directly between the projector's memory and your computer's
hard drive using the File Read and Save In File buttons (shown in the figure below).
To rename a memory setting stored on the projector:
1. Select
Picture Quality
2. Click the tab where your setting is stored (
whose name you want to change, then click
Select Standard or
Advance
Select the setting
whose name you
want to change
Click Memory
Name Change
3. Type a name up to 12 characters long, then click
To clear a memory setting stored on the projector:
1. Select
Picture Quality
2. Select the setting you want to delete, then click
deletion.
menu, then choose one of the following:
File
, then click
Memory management
Standard
, then click
Memory management
and choose
or
Advance
Memory Name Change
.
OK
and choose
and confirm the
Memory Reset
.
Edit
), select the setting
.
.
Edit
47