Adjusting The Color - Epson PowerLite Cinema 200+ User Manual

Adjusting the Color

You can use the Cinema Color Editor to fine-tune the color of the image. If you select RGB
as the color mode, you can adjust the offset, gamma, and gain for each signal color (red,
green, and blue). If you select RGBCMY, you can adjust the hue and saturation for each of
the six colors.
1. Click the
Select
Picture Quality
Click
Adjustment of image
2. Select one of the following color modes, then click
■
RGB: Lets you adjust the offset, gamma, and gain for each signal color. Use
to adjust darker shades,
shades.
■
RGBCMY: Lets you adjust the hue and saturation for each of six colors, as shown on
the color palette below. After moving a slider bar, click
Adjust the hue
(red, green,
blue, cyan,
magenta,
yellow)
44
button, then click
Picture Quality
Gamma
Adjustment of image
Select the color mode
.
Adjust
for intermediate shades, and
.
Click Adjust
Offset
for the lightest
Gain
.
Apply
Adjust the
saturation