Managing Your Settings
In addition to your projector's memory settings, you can store any number of additional
settings on your computer's hard drive. You can also use Cinema Color Editor to rename or
delete memory settings stored on your projector.
To save or recall settings on your computer:
In Cinema Color Editor, open the
to store the current Cinema Color Editor settings on your computer's hard
Save setting
drive.
to adjust the picture from settings previously saved on your hard drive.
Set from file
Note: You can also transfer settings directly between the projector's memory and your computer's
hard drive using the File Read and Save In File buttons (shown in the figure below).
To rename a memory setting stored on the projector:
1. Select
Picture Quality
2. Click the tab where your setting is stored (
whose name you want to change, then click
1. Select Standard
or Advance
2. Select the setting
whose name you
want to change
3. Click Memory
Name Change
3. Type a name up to 12 characters long, then click
To clear a memory setting stored on the projector:
1. Select
Picture Quality
2. Select the setting you want to delete, then click
deletion.
menu, then choose one of the following:
File
, then click
Memory management
Standard
, then click
Memory management
and choose
or
Advance
Memory Name Change
.
OK
and choose
and confirm the
Memory Reset
.
Edit
), select the setting
.
.
Edit
Using Cinema Color Editor
51