Epson PowerLite Cinema 500 User Manual page 39

Input Signal
Setting ! Input Signal
Adjust these settings for the type of equipment connected to the projector:
: Leave this setting on
Video Signal
the format, such as NTSC or PAL (for standard TV formats).
(or ): Change this setting to match the type of equipment connected to
Input A Input B
the Input A (or Input B) port:
For component video, select
interpret the signal; or select
manually select your video equipment's signal.
Select
RGB-Video
Select if you've connected a computer.
RGB
: Change this setting to match the type of equipment connected to the D4 port (used
D4
mainly in Japan).
Trigger Out
Setting ! Operation ! Trigger Out
Turn on this setting if you want the
the projector is operating. You can use this to raise or lower your projection screen.
Sleep Mode
Setting ! Operation ! Sleep Mode
Turn off this setting if you don't want the projector to enter sleep mode. (Sleep mode
shuts the projector off automatically when there is no video signal.) Select
, or as the length of time before shutoff; decreasing the time conserves
10 min. 5 min.
power and extends the life of the lamp. To turn the projector back on, press the
button on the remote control, or press the
Button Illumination
Setting ! Operation ! Button Illumination
Lets you turn off the illumination of the control panel buttons on the projector.
Lock Setting
Setting ! Operation ! Lock Setting
Lets you lock the projector's focus and zoom settings, or lock the projector's control panel
to make it more difficult for a child to turn on the projector. See page 25.
so the projector can automatically interpret
Auto
Component (Auto)
Component (YCbCr)
if your video equipment outputs a signal in RBG format.
Trigger out
Power
to let the projector automatically
or
Component (YPbPr)
port to output a 12-volt signal while
button on the projector.
Customizing Projector Features
to
,
30 min.
On
39