Screen Options - Epson PowerLite Cinema 500 User Manual

Screen Options

Message
Setting ! On-Screen Display ! Message
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
User's Logo
Setting ! User's Logo
Lets you display an image of your choice when the projector is warming up, not receiving
a signal, or when you press the
To capture the image, first set the projector to display the image you want to use. Then
select
User's Logo
Background Color setting to
Startup Screen
Setting ! On-Screen Display ! Startup Screen
Turn this setting off if you want to prevent your user's logo (see above) from appearing
while the projector is warming up.
Background Color
Setting ! On-Screen Display ! Background Color
Changes the screen that's used when the projector is not receiving a signal or when you
press the button to temporarily stop projection. Select
Blank
to display your user's logo on a black background.
Logo
button to temporarily stop projection.
Blank
and follow the instructions on the screen. When done, change the
, as described below.
Logo
(instead of
Blue Black
Customizing Projector Features
) or
37