Resetting The Projector - Epson PowerLite Cinema 500 User Manual

Resetting the Projector

If the image quality isn't what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Setting menu), open that
menu, select , and confirm as needed. The example below shows how to reset the
Reset
Image menu:
Open the Image
menu . . .
You can also reset the lamp usage timer, clear the memory settings, or restore all the projector
settings to their original values. Follow these steps:
1. Press the button on the remote control.
Menu
2. Open the
Reset
3. Do one of the following:
Select
Lamp-Hours Reset
(see page 58 for more information).
Select
Memory Reset
page 34.
Select
All Reset
Note: All Reset does not reset the lamp usage timer, menu language, Input Signal, and
memory settings.
menu.
to clear the lamp usage timer and reset it to zero
to clear any memory settings you created as described on
to return all projector menus to their original settings.
. . . and select
Reset
Saving and Resetting Menu Selections
35