To use a memory setting you've saved on the projector:
Access the projector's memory settings either from the remote control (see page 34) or by
using Cinema Color Editor as follows:
1. Select
Picture Quality
1. Select
Picture Quality
2. Click Memory
management
2. Click the tab where the setting you want to use is stored (
1. Select Standard
or Advance
2. Select the setting
you want to use
3. Click Select
3. Select the desired memory setting, then click
on the screen using the selected setting.
50
Using Cinema Color Editor
, then click
Memory management
and choose
Standard
. After a moment, your image appears
Select
.
Select
3. Click
Select
or
).
Advance