Epson PowerLite Cinema 500 User Manual page 62

4. Click
of the screen. One of the monitor icons
automatically moves on top of the other.
If you're using a Macintosh with OS 9.x or earlier:
1. From the Apple menu, select
Control Panels
Monitors and Sound
2. Click the
then drag one monitor icon on
top of the other.
If the
Arrange
you may need to select one of the
Simulscan resolutions. Click the
Monitor
Simulscan resolution from the
Resolution
seconds for the projector to sync up.)
The picture is upside-down or reversed.
Change the
Projection
Only part of the picture is displayed, or the picture is distorted.
Press the
If the Aspect is set to
top or bottom section of the screen (so that subtitles are visible). See page 36.
Check the
Use the
Position
If you've connected a computer and you see only half the image, make sure the
computer's Dual Display setting is turned off.
62
Solving Picture Problems
in the lower corner
Mirror Displays
, then click
.
icon, and
Arrange
option isn't available,
icon and then select a
box. (Allow a few
setting in the menu system (see page 38).
button to select a different aspect ratio (see page 23).
Aspect
, you may need to use the
Zoom
to make sure it's adjusted correctly (see page 36).
Output Scaling
setting to reposition the image on the screen (see page 36).
Click here
Zoom Caption
Click here
Drag one
monitor icon on
top of the other
option to see the