Adjustments For Computer Images - Epson PowerLite Cinema 500 User Manual

RGBCMY
Image ! Color Adjustment ! RGB/RGBCMY ! RGBCMY
Note: If you cannot access the RGBCMY settings, highlight RGB/RGBCMY (the first item in
the menu list) and press the
Use the RGBCMY settings to adjust the hue and saturation of the six color components
(red, green, blue, cyan, magenta, yellow). After moving a slider bar, highlight
press to save your changes.

Adjustments for Computer Images

In addition to the settings described above, you can adjust the Tracking and Sync settings for
analog RGB computer images. Normally, these settings are adjusted automatically by the
projector. If you notice that the image is blurry or contains dark vertical bands, you may need
to adjust the settings yourself.
Auto Setup
Image ! Auto Setup
Leave this setting on so that the projector automatically adjusts the tracking, sync, and
position of the image.
Tracking
Image ! Picture Quality ! Tracking
Adjust the tracking to eliminate vertical bands. Easiest to adjust
when the image contains a lot of fine detail (such as black text
on a white background).
Sync.
Image ! Picture Quality ! Sync.
Adjust the synchronization to eliminate blurriness. For best results,
make sure the tracking is properly adjusted first.
button, then choose RGBCMY in the sub-menu.
and
Apply
Adjusting the Image Quality
33