Broadcasting (Black & White Only); Canceling A Broadcast In Progress - Brother MFC-790CW User Manual

Broadcasting
(Black & White only)
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers and up to 50 manually dialed
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Press (Fax).
b
Load your document.
c
Press d or c to display Broadcasting.
d
Press Broadcasting.
e
You can add numbers to the broadcast
in the following ways:
Press Add Number and enter the
number using the buttons on the
LCD.
Press OK.
Press Speed Dial. Press
search by Alphabetical Order or
Numerical Order. Press the locations
where you want to send a fax.
Press OK.
f
After you have entered all the fax
numbers by repeating step e, press OK.
g
Press Black Start.
Note
• If you have not used up any of the
5
numbers for Groups, you can broadcast
up to 250 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Black Start to send
the portion that is in the memory.
Canceling a Broadcast in
progress
a
Press Stop/Exit.
b
Do one of the following:
to
# 01
c
When the LCD asks if you want to
cancel the entire broadcast, do one of
the following:
d
Do one of the following:
Sending a Fax
To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
To cancel the current job, press the
button that displays the number
being dialed. Go to step d.
To exit without canceling, press
Stop/Exit.
Press Yes to confirm.
To exit without canceling, press No
or Stop/Exit.
To cancel the current job, press Yes.
To exit without canceling, press No
or Stop/Exit.
5
5
39