Turning Off Memory Receive Operations - Brother MFC-790CW User Manual

Note
• PC Fax Receive is not supported in the
®
Mac OS .
• Before you can set up PC Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX Receiving in the Software
User's Guide on the CD-ROM.)
• In the event of a power failure, the
machine will store your faxes in the
memory for approximately 24 hours.
However, if you choose
Backup Print:On the machine will print
the fax, so you will have a copy if there is
a power failure before it is sent to the PC.
• If you get an error message and the
machine cannot print the faxes in memory,
you can use this setting to transfer your
faxes to your PC. (For details, see Error
and Maintenance messages
on page 152.)
• When you receive a color fax, your
machine prints the color fax at your
machine but does not send the fax to your
PC.
Changing the destination PC
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive.
g
Press Memory Receive.
h
Press PC Fax Receive.
i
Press <USB>, or the PC you want to
receive faxes.
j
Press Backup Print:On or
Backup Print:Off.
k
Press Stop/Exit.
Turning off Memory Receive
Operations
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive.
g
Press Memory Receive.
h
Press Off.
i
Press Stop/Exit.
Note
6
The LCD will give you more options if
there are received faxes still in your
machine's memory. (See Changing
Memory Receive Operations on page 54.)
Receiving a Fax
6
53
6