Loading Documents; Using The Adf; Using The Scanner Glass - Brother MFC-790CW User Manual

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF

The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 20 lb
2
(80 g/m ) paper and always fan the pages
before putting them in the ADF.
Recommended environment
Temperature: 68 to 86° F (20 to 30° C)
Humidity: 50% to 70%
Paper:
20 lb LTR (80 g/m
Document Sizes Supported
Length: 5.8 to 14 in. (148 to 355.6 mm)
Width: 5.8 to 8.5 in.
(148 to 215.9 mm)
Weight:
17 to 24 lb (64 to 90 g/m
How to load documents
CAUTION
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
Make sure documents with liquid
correction fluid are completely dry.
a
2
b
c
d
2
2
2
A4)
2
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
2
)

Using the scanner glass

2
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported
Length:
Width:
Weight:
How to load documents
To use the scanner glass, the ADF must
be empty.
a
Loading paper and documents
Unfold the ADF Document Output
Support Flap (1).
Fan the pages well.
Adjust the paper guides to fit the width of
your document.
Place your document, face down, top
edge first in the ADF until the LCD
display shows ADF Ready and you feel
it touch the feed roller.
CAUTION
Up to 11.7 in. (297 mm)
Up to 8.5 in. (215.9 mm)
Up to 4.4 lb (2 kg)
Note
Lift the document cover.
2
1
2
2
2
21