Operate The Monitor; Adjust The Monitor Angle (Tilt); Screen Off - Panasonic Strada CN-NVD905U Operating Instructions Manual

Operate the monitor

Adjust the monitor angle ( TILT)
Adjust the angle to give easy visibility at the position mounted.
1
Press
 The Open/Tilt/Eject screen is displayed.
2
Touch [Tilt] to adjust the angle.
 Each touch switches the angle as shown below.
1 2 3

When operation is complete, press
Caution:

Take care to avoid your fi ngers from becoming trapped as the monitor opens and closes.
Note:

When the engine is turned off, the monitor returns to the fully closed position.
 Next time the engine is started, the monitor opens to the previously adjusted angle.
 Adjust the brightness of the screen for easy visibility.

Do not force the monitor forward by hand, or block its operation.
 Do not strike the monitor strongly. (For example, take care when moving luggage in and out of the vehicle.)

Screen off

Select [Screen Off] from the Navigation
menu.
( page 16)
 The system operates as follows, depending on the specifi c
( page 86)
Screen Off settings.
[On]: Screen display is switched off, but sound remains on.
[Off]: Both screen display and sound are switched off.
 Illumination (button illumination) is not switched off.
To display the screen
Press , or
.
4 5
,
.
, or .
( page 92)
UP
1
5
DOWN
21
21