During Route Guidance; Display The All Route Screen Manually; Autoroute - Panasonic Strada CN-NVD905U Operating Instructions Manual

During route guidance

Display the All route screen manually

The All route screen, displaying the route from starting
point to destination, can be displayed manually.
1 Select [Map view] on the map
screen.
 The Change map view screen is displayed.
2 Select [Route overview].
 The All route screen is displayed.
 Select [Start] to start route guidance.
 Select [Route] to display the Change Route
screen. ( page 38)

The distance to the next destination is displayed,
together with estimated arrival time, remaining
time, etc. (
The estimated arrival time and remaining time

can be switched.
If the vehicle is not on the route, the direction

and distance to the destination are displayed.
 Select [Turn List] to display the turn list.
Displays current
position/destination/
direction to turn, etc.
60
60
page 29)
( page 39)
Road
name
Section
distance
Displays the map for
the selected point.
Note:
 The following operations are not available from the
manually displayed All route screen.
[3 routes] display

Demo

Use the All route screen, which is displayed
automatically after route searching is complete, to
access [3 routes] and demo displays.

Autoroute

If the vehicle deviates from the guidance route, a new
search is performed automatically and a new route to the
destination from the current position is displayed.
Note:

Autoroute does not operate for areas where there are
no roads to the search target, such as within park
sites. Autoroute only starts when it judges that the
vehicle is moving along a search subject road.
( page 37)